Permanent Christmas lights in Gilbert, AZ
If you live in Gilbert and are weighing permanent Christmas lights, start here: how the track goes on, what Valley installers publish for the price, and what to ask before anyone measures the eave.
How permanent Christmas lights mount on a Gilbert house
A permanent system has three parts. A track, usually aluminum, is screwed along the fascia board or just under the roof edge. LED points sit in the track at a fixed spacing. A power supply and a controller near an outlet run the whole line, and a phone app picks the colors, the brightness and the schedule.
On most Gilbert houses the track goes on stucco fascia under the drip edge of a concrete tile roof. It is fixed to the fascia or the eave, never to the tile, and the track is painted to match the trim so it fades into the house in daylight. Gables and hip corners need sections cut and joined at an angle, and that is where a careful install and a rushed one look most different.
Because the track stays up, the same eave can glow red and green in December, orange at Halloween, team colors on game day and plain warm white the rest of the year. If the roof is tile, read how a track meets a tile roof before choosing where it goes.
What permanent Christmas lights cost in the Phoenix area
Three Valley companies that install permanent lighting put their numbers on their own pages. None is a quote for your house and none is ours; use them as a range to hold a quote up against.
| Source | What it says | Read |
|---|---|---|
| Leading Edge Decorative Lighting Gilbert page Read 12 Nov 2026 | Most projects land in the $2,500 to $5,500 range, billed at $24 to $34 per linear foot. | 12 Nov 2026 |
| Big Pig Smart Lighting Cost guide Read 12 Nov 2026 | Most Greater Phoenix homes run $2,500 to $6,000, or about $20 to $30 per linear foot installed. | 12 Nov 2026 |
| Stay Off The Roof Gilbert page Read 12 Nov 2026 | A $2,500 minimum for permanent roofline lighting, and a $1,000 minimum for permanent tree wraps. | 12 Nov 2026 |
What moves a quote inside those ranges: the feet of eave you want lit, how many corners and gable peaks the track has to turn, a second story, how many zones you want to control separately, and where the power supply can go. Lighting only the front is the cheaper way in, and the rest of the house can be priced as a second phase.
Figures checked November 2026. Each row names the company page it came from, with the read date in the last column.
Are permanent Christmas lights worth it?
Set the permanent quote against what you would spend on a hang-and-takedown every year. Light Up AZ, a company that installs permanent systems, puts professionally installed seasonal lights at $500 to over $1,500 each year. Holiday Lights Phoenix publishes $500 to $2,500 for most Gilbert installs, removal and storage included. Divide the permanent price by your own seasonal number and you have the count of seasons before the two come out even, before any repairs. The cost page has what a seasonal install costs in Gilbert.
The math tends to favor people who would pay for hanging every year anyway, who light the house for more than one holiday, and who plan to stay. It favors them least on a house they may sell in two or three years, or one whose roof or fascia is due for work, because the track has to come off for that. If one December of lights is all you want, seasonal Christmas light installation for a Gilbert house is the cheaper place to start.
Downsides of permanent Christmas lights
- It is on the house all year. A track painted to match the trim is hard to spot from the street, but it is there every day, and one in the wrong color shows.
- It goes on with screws, so taking it off later leaves holes in the fascia to patch and paint.
- It needs power at the roof end. The controller and power supply need an outlet close by. Adding an outlet or wiring a supply in is electrical work, and the Registrar of Contractors licenses residential electrical work under its own classification, R-11. Ask who on the job holds it.
- Flashing patterns may not be yours to choose. Gilbert's outdoor-lighting code, § 42-34, applies to residential uses and says "No intermittent, flickering or flashing lights shall be permitted." It does not mention holiday lights, and this page cannot tell you whether it reaches a chase pattern on your eave. Steady colors sidestep the question.
- An HOA can say no. Arizona's planned-community statute, A.R.S. § 33-1808, says nothing about holiday lights, so your community's own rules and design guidelines decide. Read HOA approval for permanent lights before you book a visit.
Questions to ask a permanent lighting installer
- What is your ROC number? Check it on the Registrar's contractor search, which takes a six-digit license number or a name.
- What does the warranty cover, and for how long? Ask about the LEDs, the power supply and the labor separately, who honors it, and what happens to it if the company closes.
- Do you carry liability insurance and workers' compensation? The ROC says it does not require an entity to possess insurance to be licensed (workers' compensation aside), so ask rather than assume.
- Where do the power supply and controller go, and does that mean a new outlet?
- How is the track finished at the gable ends, what color is it, and can I see a piece against my fascia first?
- What happens to the track if the roof or fascia is redone? Ask whether removal and refitting is priced now or later.
Questions about permanent Christmas lights in Gilbert
Can you see permanent lights during the day?
A little. The track is a narrow channel along the fascia, and when it is painted the trim color most people walking past never notice it. From the driveway or up a ladder you can see it, and a track that does not match the trim shows from the street. Ask to see a sample piece against your fascia before you sign, and look at the close-up under the price table.
Can permanent lights go on a tile roof?
Yes. In the usual install the track never touches the tile: it is fixed to the fascia or under the eave, below the tile's edge. The tricky parts are the gable ends and any spot where the tile overhangs the fascia unevenly, so ask how those are handled. The seasonal side of the same question is in the guide to Christmas lights on a tile roof.
What is the average price for permanent lights on the front of a 2200 sq ft home?
Floor area does not set the price; the length of the eave does. Estimate the front roofline in feet and set it against the per-foot rows in the table above: Leading Edge Decorative Lighting bills $24 to $34 a foot in Gilbert, and Big Pig Smart Lighting puts Phoenix-area work at about $20 to $30. Then hold the result up against each company's minimum. For a firm figure, ask for a front-only quote.
How much does it cost to have someone install permanent Christmas lights?
Leading Edge Decorative Lighting's Gilbert page says most of its projects land in the $2,500 to $5,500 range, and Big Pig Smart Lighting puts most Greater Phoenix homes at $2,500 to $6,000. Stay Off The Roof will not take a permanent roofline job under a $2,500 minimum. Where your house falls depends on the feet of eave and the number of zones. Send one request and a local installer prices your own roofline.